Effective and wax-safe pre-wash agent

• Wax-safe
• Thick foaming
• Effective against summer bugs
• Delicious bubblegum scent

Fure® Pre-wash is a wax-safe and effective foam wash for car exterior surfaces. The detergent does not contain dyes, wax, or other agents that add gloss or protection. It can be used with a foam lance connected to a pressure washer or with a pump sprayer / spray bottle. It is effective against both summer bugs and winter road salt. Fure Pre-wash is also very economical, as one car wash consumes about 1–1.5 dl of the product. The product is biodegradable.

Fure Pre-wash is a truly versatile product. We see it used a lot for washing large vehicles, such as Sprinters, motorhomes, camper vans, and caravans. When there is a lot of surface area to wash, the pre-wash agent saves significant time.

If the car has not been washed for a long time, it is recommended to spray Fure Tar Remover under the pre-wash agent, which helps to dissolve stubborn dirt and road salt.

Instructions for use

Dilute Fure Pre-wash in a 1:10 ratio if using a foam lance connected to a pressure washer, and 1:20 if using a pump sprayer. Let the detergent dwell for 5–10 minutes, then rinse the surfaces thoroughly with water. Do not let the product dry on the surface.

Fure Pre-wash can be used in a foam lance in two ways. You can pour the undiluted product into the foam lance and set the mixing ratio to lean (this is what we recommend at Fure). The other option is to pour 1–1.5 dl of the product into the foam lance, fill the rest with water, and set the mixing ratio to full.

Also read on our blog: Why is a car pre-wash so important?

Moottori.fi has also reported well on this: Pre-wash is the most important step of car washing